- ONE INCH ENGLISH BRIDLE BELTS
WITH SOLID BRASS BUCKLES
-
- We have made these same belts for over 50 years. Each
belt is hand cut with a draw gauge from 8-10 oz domestically
tanned "English bridle" leather bends, which make for
extremely durable strapping. This leather is actually tanned
and finished for the horse bridle industry. This vegetable tanned
leather is quite expensive, but worth the difference. Each strap
is worked through 7 steps before it's attached to a solid brass
buckle using solid brass rivets. Color choice is dark brown,
medium brown, burgundy, chestnut, and black. Because dye batches
from the tannery will vary and because computer screens vary,
we do not recommend dependence on these photos for matching color.
Custom belts for any buckle you may have is our specialty.
Snaps or Chicago screw rivets available on request.
-
-
- Please order by style number which is buckled
based. All five leather colors available for each buckle.
NEW – natural undyed belt leather available
for all styles (photo available)
- The belt straps are cut 15/16" wide in order
to fit through 1" buckles without rubbing the sides. Exceptions
are 1G and 1S which are a full one inch wide.
-
- #1J
$52.00
|
- Solid brass buckle. #1Jn bright nickel finish. #1Jb bright
brass. Shown with chestnut leather.
|
- #1R
$52.00
|
- Solid brass roller buckle. #1Rsn satin nickel finish.
#1Rb satin brass finish. Shown with dark brown leather.
|
- #1S
$52.00
|
- Solid brass buckle. #1Sb natural brass. #1Sn bright nickel
finish. Shown with chestnut leather.
|
- #1G
$52.00
|
- Solid brass buckle in natural brass. Shown with medium
brown leather.
|
- #1W
$52.00
|
- Solid brass buckle. #1Wsn satin nickel finish. #1Wb satin
brass finish. Shown with black leather.
|
- #1D
- $52.00
|
- Solid brass buckle. #1Db bright brass. #1Dn bright nickel
finish. Shown with burgundy leather.
|
- $48.00
|
- Belt strap, no buckle . Please go to our page below:
https://www.narragansettleathers.com/BeltForMyBuckle.html
|
-
- Please click here to
learn about ordering.
-
- BELT SIZE
Please determine belt size by measuring a currently used belt.
Pants waist size is no longer a reliable way to determine belt
size.
-
- ALL BELTS ARE MADE TO ORDER
- SIZE IS YOUR RESPONSIBILITY. PLEASE MEASURE. NO
RETURNS.
Measure from point "A" on the buckle to the most used
hole on your current belt. It might not be the middle hole.
This measurement is usually 2 to 5 inches bigger than your pants
waist size. Note that “A” on the top belt is
just inside the buckle end where the swivel tongue meets the
buckle body…..and that “A” on the bottom belt
is at the base of the hook. It’s important that the working
length of the buckle be included in your measurement.
Point "B" on the new belt will be the middle of 5 holes
(or loops on some styles).
-
|
